Rust binder with zinc is intended for the treatment of a rusty metal surface prior to painting. A metal surface is covered with a protective phosphate film and prevents from spreading of corrosion. This is an excellent preparation, as it contains alloying additives.
Directions for use: Shake before use. Remove dirt from the surface, loose rust (mechanically), and degrease (using mineral spirit or Nefrasas). Apply the rust binder with a brush and rub it in well. If the ambient temperature is higher than 20 °C, moisten it in an hour. Leave for 3-4 hours and flush with plenty of water, and degrease once more. Use the chemical at a temperature not lower than 0 °C. Consumption rate is 100-300 g/m². It is supplied in 0.5l, 1l, 3l, 5l bottles, and 220l barrels.